High power CW solid-state multilaser system

A laser system containing four CW Nd:YAG double-rod lasers, transforming optics and a fibre with input-output optics has been designed and investigated. It is shown that reduction of the beam parameter product of the non-Gaussian beams in the image space of the lens has made it possible to collect the emission of four lasers to the same fibre. Independent laser operation has provided the output power control in the range of 10–900 W with a stable light spot size on the input end of the fibre.     

An optical fibre pH sensor based on dye doped mesostructured silica

This paper describes the synthesis and optical pH sensing properties of a pH indicator dye activated mesostructured silica coated optical fibre. The pH-sensitive dye bromothymol blue was incorporated into the mesostructure sol precursor and thin films/coatings were used for pH-sensing applications without prior removal of the surfactant. The pH sensitivity range and operating wavelength were analysed by absorption measurements on layer dip-coated on glass slides. The pH sensing properties of coated optical fibre were tested by evanescent wave method. Experiments were carried out by using a series of solutions of known pH. No leaching was observed (except at very high pH) and an excellent reversibility was obtained between pH=2 and 5.     

Low noise double pass L-band erbium-doped fiber amplifier

A new double pass long wavelength band erbium-doped fiber amplifier with enhanced noise figure characteristics is demonstrated. The noise figure is improved by about 2.6 dB with the incorporation of broadband conventional-band fiber Bragg grating (FBG) in between the two segments of erbium-doped fiber. By incorporating both the pre-amplifier and the FBG, the noise figure is further improved, which varies from 4.0 to 5.0 dB in the flat gain region from 1570 to 1600 nm. The gain varies from 32.0 to 33.4 dB within this region. The new amplifier with high gain and low noise figure can be useful as an inline amplifier in a wavelength division multiplexing transmission system.     

Controlling the gain shape of Er^3＋—doped fluorozirconate fibre amplifier by a coherent field

We proposed a four-level system to explore the quantum interference effects on optical amplification.We found that the gain of the probe.including positions and values of gain peaks,can be adjusted by changing the coherent field and the incoherent pumping.At the same time,we can also modify the absorption profile of electromagnetically induced transparency by the incoherent pump.The results provide a method to flatten the gain of Erbium-doped fibre amplifiers.     

A telescope illumination system for a wide-field endoscope

Endoscopic illumination systems conduct light down a built-in fibre-optic bundle to illuminate the object. Many modern endoscopes employ wide-field imaging optical systems and therefore require an illuminating beam of large divergence. This is commonly provided by placing a strong diverging lens at the far end of the fibre bundle, but it results in a poor uniformity of illumination in the object space. This paper describes the design of a telescopic illumination system to overcome this problem.     

Single LED based dual wavelength referenced optical fibre sensor system using intensity modulation

An intensity-modulated optical fibre sensor system is described which employs a single LED source to provide the measurand and the reference signals with two separate wavelength bands. The allocated wavelength bands are selected to minimize any differential intensity effects that may arise from LED thermal variations. The sensor system, comprising a transceiver unit connected to an optical displacement sensor using a single optical fibre, provides an output fully referenced for all major common-mode variations that are likely to occur. Performance characteristics for the prototype system are reported which show a linear displacement range of over 20 mm.     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

非本征型法布里-珀罗干涉仪光纤布拉格光栅应变温度传感器及其应用

介绍了光纤布拉格光栅非本征型法布里珀罗干涉仪集成复用传感器的结构、应变和温度同时监测的原理 ;观察到光纤布拉格光栅反射谱和非本征型法布里珀罗干涉仪干涉谱间的串扰 ,用 3dB带宽平均波长法减小了该串扰 ,提高了测量精度 ;将该传感器应用于三维编织复合材料的应变及温度同时监测。实验结果表明温度精度为± 1℃ ,应变精度为± 2 0 μ ,可满足实际应用的要求     

Thermal behaviour of polyacrylamidoxime-copper chelates

The purpose of this work was to investigate the effect of several factors (anion type in the copper salt, pH and concentration of the salt solution) on the structure and thermo-oxidative degradation of the polyacrylamidoxime-copper chelates, by using elemental analysis, IR spectroscopy and dynamic thermogravimetry. The chelates containing copper ions as sulphate exhibit a better initial thermal stability than the polyacrylamidoxime fibre presumably due to the crosslinking generated by the intermolecular complexation of the ions; the removal of the sulphate anions takes place concomitantly with the second step of polymeric chain decomposition. The initial thermal decomposition of the chelates formed by copper ions as nitrate begins at lower temperatures as compared to the polyacrylamidoxime fibre, probably by the nitrate anion release, which partly overlaps the initial decomposition of the copper ion-crosslinked polymeric chains. Copper ions as either sulphate or nitrate catalyse the reactions involved in the main step of polyacrylamidoxime fibre decomposition; the higher the copper amount, the stronger the catalytic effect.